I do not intend to go into the parts repro business but these are some
things that I needed and others were not making, so if you're willing
to pay the price, I'll make some for you.
Even though you may think my prices are high, the time involved in
making these things is very time consuming. They are made one at a
time and much time is spent hand detailing after release from the
molds, and bear in mind that the molds, too, had to be made. So if I
were doing this for wages, my pay would be pretty poor. Please allow
extra time (week - 10 days) for many of the knobs etc to be fabricated
as many are made to order.
Hats off to Larry
Bordonado who do this as their main product and offer them at
more reasonable prices.
The original feet used on the beautiful
Utah 30 Speaker often suffers from
pot metal cancer. Over the yearsI made and sold a number of pairs of my reproduction feet. My
mold has now given out and when this pair is gone, there will be
no more. I promise that when these are installed, no one will be
able to tell that they are reproductions. The ones on
my model 30 speaker are my first
pair that I made about 16 years ago.
These are cast from a mold made from an original pair of feet. The
material is a high quality industrial resin and bronze powder that
looks just like the originals. I have one set left and I will not
be making any more.
Lamp Hood
forRadiola 17/18<<< click on links for details
===============================================
Radiola model 60
reproduction feet the Radiola 60
click to enlarge
The Radiola 60 often suffered from bad feet that have
swollen, cracked or disintegrated from moisture. The originals
were made of solid wood or Repwood that often
split and came apart. The Repwood would
absorb moisture and deteriorate.
These are cast from a mold made from an original set of feet. The
material is a high quality industrial resin and wood flour that
looks just like the originals. I have one set left and I will not
be making any more.
Motorola
TV model VT-71 control panel decal set now available
click on image for details
^click on for info
Decals for the Pepsi Bottle Radio
(Reproductions)
click on image for details
WD-11 to UX 199 socket adaptor.
Adaptors to use UX-199 or any "UX" based tube (of the proper type)
in place of WD-11's
click on
image for details
^click on for info
Majestic,
"Charlie McCarhty" reproduction doll for the 1938
radio
click on image for details
^click on to enlarge
Radiola 24, AR-812, Super VIII,
& several Brunswick models. Station selectors paper dial
overlays.
CLICK
HERE
^click on for info
Radiola 17
Lamp Hood
USE Radiola 18 hood.
click on image for details
^click on for info
Radiola 18
Lamp Hood
Here's what many of you have been seeking, my hood is the
correct size and looks more authentic. Unlike the soft metal one
that was previously supplied by another source available that
mounted poorly by nails that you had to bend (often damaging the
hood) and then hung loose unless glued in place, mine is made of
a special rigid compound with a real bronze metal finish and
mounted with two tiny screws.
click to enlarge
click on image for details
